Variant C
ORTHOPEDIC MEASUREMENT SHOE
Thanks to the development of our kit, it is possible to create a light, stable and naturally standard-compliant sole structure. The possibilities are very extensive with this system and allow a perfect, cost-effective orthopedic care.
KIT
When developing our kit system, our objective was to make the possibilities for individualization as extensive as possible.
Resulting from this:
- a product range that allows everything from S1 - S3 and from low shoe to boot.the range and the corresponding applications can be found in the product overview below.
- a floor structure - by means of sheathing and sole plate - which allows all modifications in the processing.
- a very extensive TYP test in accordance with ÖNORM Z1259, which makes it possible to hand over these individual modifications to the patient as certified PPE. Thus, the issuance of the certificate of conformity is possible.
- In accordance with ÖNORM Z1259, the custom shoes may only be manufactured using tested kits. The required components for the respective design are as individual as the foot of the respective patient, therefore we ask you to acquire the required components by means of the order form.
- In order to be able to issue a standardized certificate of conformity, it is necessary to comply with the manufacturing instructions each time an individual customized shoe is manufactured.these are included in the scope of delivery.
- These custom orthopedic shoes are only available through an orthopedic shoemaker.
JUST_AIR
OUR RECOMMENDATION:
FOR LIGHT INDOOR WORK
Safety class ISO 20345:2011 S1P
Additional benefits: very light, air-permeable upper, sensomotoric properties,
also available with DIA lining.
Art.no.: o1440j-ortho
Art.no.: o1440j-orthodia
TOM_AIR
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
safety class ISO 20345:2011 S3
Additional benefits: lightweight, breathable, flexible and seamless, sensomotoric properties,
also available with DIA lining.
Art.no.: o1440b-ortho
Art.no.: o1440b-orthodia
TIM_AIR
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
safety class ISO 20345:2011 S3
Additional benefits: lightweight, breathable, flexible and seamless, sensomotoric properties,
also available with DIA lining.
Art.no.: o0431b-ortho
Art.no.: o0431b-orthodia
MARCEL_A
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: Low boot, for every use, breathable, sensomotoric properties
Optionally with shock absorbing rubber overcap (please specify when ordering)
also available with DIA lining
Art.No.: o5800a-ortho
Art.no.: o5800a-orthodia
MARCEL_B
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: seamless therefore very long service life, uniform pressure distribution of the
ball-bearing lacing, sensomotoric characteristics
Optionally with shock absorbing rubber overcap (please specify when ordering)
Art.no.: o5800b-ortho
BOB M2
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: Leather upper, lightweight, abrasion-resistant and shock-absorbing rubber overcap, sensorimotor properties,
Art.no.: o1440h-ortho
BOB M1
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: Leather upper, lightweight, abrasion-resistant and shock-absorbing rubber overcap, sensorimotor properties,
Art.no.: o0431h-ortho
EASY GO_HOT
OUR RECOMMENDATION: FOR MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: Nomex shoe lace and heat resistant seams, especially suitable for steel industry, sensomotoric properties,
Optionally with shock absorbing rubber overcap (please specify when ordering)
also available with DIA lining.
Art.No.: o6000b-ortho
Art.No.: o6000b-orthodia
KL.PRIEL
OUR RECOMMENDATION: MEDIUM INDOOR/OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: Leather upper, even pressure distribution of the strap due to ball bearing lacing
Art.no.: o5700a-ortho
ARLBERG
OUR RECOMMENDATION: HEAVY OUTDOOR WORK
Safety class ISO 20345:2011 S3
Additional benefits: completely lined with genuine lambskin, especially suitable for low temperatures, abrasion-resistant and shock-absorbing rubber overcap
Art.no.: o3944b-ortho
